截止阀
是关闭件(阀瓣)沿阀座中心线移动的阀门
在管理中主要做切断用。
优点:
1、在开闭过程中密封面的摩擦力比闸阀小,耐磨
2、开启高度小
3、通常只有一个密封面,制造工艺好,便于维修
截止阀使用较为普遍,但由于开闭力矩较大,结构长度较长,一般公称通径都限制在DN≤200mm以下。截止阀流体阻力损失较大。因而限制了截止阀更广泛的使用
截止阀的种类很多,根据阀杆上的螺纹的位置可分:
一、上螺纹阀杆截止阀:截止阀阀杆的螺纹在阀体的外面,其优点是阀杆不受介质侵蚀,便于润滑,此种结构采用比较普遍
二、下螺纹阀杆截止阀:截止阀阀杆的螺纹在阀体内。这种结构阀杆螺纹与介质直接接触,易受侵蚀,并无法润滑。此种结构用于小口径和温度不高的地方。
三、根据截止阀的通道方向,可分为:直通式截止阀,角式截止阀和三通式截止阀,后两种截止阀通常做改变介质流向和分配介质用。