闸阀
闸阀是指关闭件(闸板)沿通路中心线的垂直方向移动的阀门
闸阀在管路中主要作切断用
闸阀是使用很广的一种阀门,一般口径DN≥50mm的切断装置都选用它,有时口径很小的切断装置也选用闸阀
闸阀的优点:
1、流体阻力小
2、开闭所需外力较小
3、介质流向不受限制
4、全开始,密封面受工作介质的冲蚀比截止阀小
5、体型比较简单,铸造工艺性较好
闸阀的不足:
1、外形尺寸和开启高度都较大,安装所需空间较大
2、开闭过程中,密封面间有相对摩擦,容易引起擦伤现象
3、闸阀一般都有两个密封面,给加工,研磨和维修增加一些困难
闸阀的种类
1、按闸板的构造可分
1)平行式闸阀:密封面与水质中心平行,及两个密封面互相平行的闸阀。在平行式闸阀中,以带推力楔块,这种闸阀适用于低压中小口径(DN40—300mm)闸阀。也有在两闸板间带有弹簧的,弹簧能产生预紧力,有利于闸板的密封。
2)楔式闸阀:密封面与垂直中心线成某种角度,即两个密封面成楔形的闸阀。密封面的倾斜角度一般有2°52′,3°30′,5°,8°,10°等,角度的大小主要取决于介质温度的高低,一般工作温度愈高,索取角度应愈大,以减小温度变化时发生楔住的可能性。在楔式闸阀中,又有单闸板,双闸板和弹性闸板之分。单闸板楔式闸阀,结构简单,使用可靠,但对密封面角度的精度要求较高,加工和维修较困难,温度变化时楔住的可能性很大。双闸板楔式闸阀在水和蒸气介质管路中使用较多。它的优点是:对密封面角度的精度要求较低,温度变化不易引起楔住的现象,密封面磨损是,可以加垫片补偿。但这种结构零件较多,在粘性介质中易粘结,影响密封。更主要是上、下挡板长期使用易产生锈蚀,闸板容易脱落。弹性闸板楔式闸阀,它具有单闸板楔式闸阀结构简单,使用可靠的优点,又能产生微量的弹性变形弥补密封面角度加工过程中产生的偏差,改善了工艺性,现已被大量采用。
2、按阀杆的构造闸阀又可分为:
1)明杆闸阀:阀杆螺母在阀盖或支架上,开闭闸阀时,用旋转阀杆螺母来实现阀杆的升降。这种结构对阀杆的润滑有利,开闭程度明显,因此被广泛利用。
2)暗杆闸阀:阀杆螺母在阀体内,与介质直接接触。开闭闸板时,用旋转阀杆实现。
3)这种结构优点是:闸阀高度总保持不变,因此安装空间小,适用于大口径或对安装空间受限制的闸阀。此种结构要装有开闭指示器,以指示开闭程度。这种结构的缺点是:阀杆螺纹不仅无法润滑,而且直接接受介质侵蚀,容易损坏。
闸阀的通径收缩
如果一个阀体内的通道直径不一样(往往都是阀座处的通经小于法兰连接处的通经),称为通经收缩。
通径收缩能使零件尺寸缩小,开、闭所需力相应减小,同时可扩大零部件的应用范围。单通经收缩后。流体阻力损失增大。
在某些部门的某些工作条件下(如石油部门的输油管线),不允许采用通经收缩的阀门。这方面是为了减小管线的阻力损失,另一方面是为了避免通经收缩后给机械清扫管线造成障碍。